Architecture Structure Cad Draftsman - resumes / job wanted - craigslist (2024)

QR Code Link to This Post

Summary:

To obtain a full time Senior Cad Draftsman position in a firm where I will be able to further my knowledge of the profession through an interactive and challenging work environment.

Education:

Technical Trades Institute Associate's Degree, Architecture / Structural Drafting & Design

Cairo University Bachelor’s Degree Accountant (Cooperative & Administrative Studies)

Approved by State of Illinois as Cad Instructor

Experience:

Fortress Plus Soulutions June 2023( Contract Job)
Western Springs, IL 60558

Senior Architecture Cad draftsman to implement the Architect and Structure engineer drawing, electrical power, lighting, plumbing, floor plans, sections and elevation for Commerical building, Residential Homes and Banks using AUTOCAD 2022with xref files and also maintain all project drawings and going out and doing building measurement as built and create all layout required.

CJ Architects, Inc. Jan 2023 ( Contract Job)
Darien, IL 60561

Senior Architecture Cad draftsman to implement the Architect and Structure engineer drawing, electrical power, lighting, plumbing, floor plans, sections and elevation for Commerical building, Residential Homes and Banks using AUTOCAD 2022with xref files and also maintain all project drawings and going out and doing building measurement as built and create all layout required

Vangard Development Group May 2022 (Contract Job )
245 Franklin Road (Glencoe, IL 60022 )

Cad draftsman to implement the MEP and Architecture engineer drawing, electrical power, lighting, plumbing, floor plans, sections and elevation for Commerical building, Residential Homes and Banks using AUTOCAD 2022 with xref files and also maintain all project drawings and updated; setup all biding for as built construction, going out and doing building measurement as built and create all layout required.

MRV Architects Inc Nov 2021 – Feb 2022
5105 Tollview Dr ( Rolling Meadows, IL 60008 )

Cad draftsman to implement the Architects and engineer Structure drawing, electrical power, lighting, plumbing, floor plans, sections and elevation for Popeyes , Mac Donald and Taco Bell Stores using AUTOCAD 2021 with xref files and also maintain all project drawings and updated; setup all biding for construction, going out and doing building measurement as built and create all layout required.

A.C. Architect Design Group May 2020 – Nov. 2020 (Contract from Home)
250 N. Halsted ( Chicago, il 60622 )

Cad draftsman to implement the MEP and engineer Structure drawing, electrical power, lighting, plumbing, floor plans, sections and elevation for court house and jail, Residential Homes and Banks using AUTOCAD 2019 with xref files and also maintain all project drawings and updated; setup all biding for construction, going out and doing building measurement as built and create all layout required

Technology Consulting Group September 2019 – March 2020 (Contract Job)
226 Linden Road Barrington, IL 60010

CAD draftsman to implement the MEP and engineer Structure drawing, electrical power, lighting, plumbing, floor plans, sections and elevation for Commerical building, Residential Homes and Banks using AUTOCAD 2017 with xref files and also maintain all project drawings and updated; setup all biding for construction, going out and doing building measurement as built and create all layout required

National Roofing Contractors Association April 2019 – August 2019 (contract job)
10225 W. Higgins Road Rosemont , IL 60018

Architectural draftsman to implement the engineer Structure drawing, roofing system and details for Commerical building, Residential Homes using AUTOCAD 2017 & 2019 with xref files and also maintain all project drawings and updated all layout required

Technology Consulting Group September 2018 – March 2019 (Contract Job)
226 Linden Road Barrington, IL 60010

Cad draftsman to implement the MEP and engineer Structure drawing, electrical power, lighting, plumbing, floor plans, sections and elevation for Commerical building, Residential Homes and Banks using AUTOCAD 2017 with xref files and also maintain all project drawings and updated; setup all biding for construction, going out and doing building measurement as built and create all layout required

Peri Formwork Systems, Inc Feb. 2016 – September 2018
600 W. Cermak Road Chicago, IL 60616

Senior Cad Draftsman to generate complete MEP and Structure Core for high rise building and create Assembly drawings and onside Assembly using ACS-C400, Trio and VARIO system such as cerate (RCS RAIL, CLIMBING BRACKET, WORKING BRACKET, CAT WALK, EXTERNAL, INTERNAL PLATFORM AND UPPER RIGHT for structures building and Dimension construction drawings. Also using the Blue beam and Print 2 Cad to create and dimension the structure core building.

Shamrock Electric co. Jun 2015- Dec 2015
1281 East Brummel Avenue (El Grove Village, IL 60007)

Cad Draftsman to implement the MEP engineer Structure drawing, generate complete electrical conduit installation drawings for cast in place structures pre cast structures and steel structures. Dimension construction drawings for field use. Generate coordination sections for MEP meetings. Update As-Built drawings. Transferring electrical hand sketches into AUTOCAD for field use. Updating drawings from field red lines and estimates all material take offs for purchasing and using AUTOCAD 2014 for PC and MAC also maintain all project drawings, xref files and updated also solve all cad problems and doing building measurement as built and create all layout for electrical project as required.

Heartland Cabinet Supply. Feb 2015 – Jun 2015
6119 Northwest Highway Crystal Lake, IL 60014

Hired as experience AUTOCAD Architectural Draftsman, to design all type kitchen cabinet and update all the architect drawings with xref files and create the DFX files to transfer to INROUTE 5 cut machine includes taken all the field measurement and do all the sketches estimates all the materials and costs.

Structure Management Midwest November 2012 – Jan 2014
908 N Halsted ( Chicago, IL 60622 )

Cad draftsman Create all construction drawings, going out and doing building measurement as built and create all layout required and Maintain, update, archive, scanning, import Ms.-word; excel specifications, data, documents, images to AutoCAD. Convert all PDF drawings to AutoCAD. Maintain and operate cad system equipment with xref files. Using AutoCAD 2012 also prepare and estimates all material take offs for purchasing.

Applied Energy Services Corporation May 2007 – Nov. 2011
421 Lexington Drive ( Buffalo Grove, IL 60089)

HVAC cad draftsman to drafts all type of Mechanical HVAC & Structure drawings for a variety of buildings also prepare and estimates all material take offs for purchasing. Draft the Structure drawing, Electrical Power, lighting, Plumbing, Process Piping, and Fire Protection system drawings, using AUTOCAD 2009, 2010.

PG Architecture Design/Build December 2005 – April 2007
2601 Reid Farm Road ( Rockford, IL 61114 )

Cad draftsman to implement the MEP and engineer Structure drawing, electrical power, lighting, plumbing, floor plans, sections and elevation for Rockford cardiology, Winnebago court house and jail, Residential Homes and Banks using AUTOCAD 2005 &2007 with xref files and also maintain all project drawings and updated; setup all biding for construction, going out and doing building measurement as built and create all layout required

ITT Technical Trades Institute September 1999 – Feb 2003

I was responsible to teach students first quarter basic drafting, second quarter AUTOCAD R14, 2000 and third quarter architectural drafting and design and six-quarter project development management. I responsible to repair the cad lab install software, hardware and solve troubleshooting problems.

Skills & Expertise

Able to handle multiple text projects drafting at the same tim
Own Autocad Station 2022 for PC & 2023 for Mac
Experience with Ms. Office, Excel, Outlook, Windows XP network and Adobe PDF files
Blue Beam Software and Print to Cad
Experience using and configure deferment’s type of Plotter, Scanners and Printers. I have my Own

Architecture Structure Cad Draftsman - resumes / job wanted - craigslist (2024)

FAQs

What is the difference between an architect and a draftsman? ›

Differences between architects and draftsmen

Draftsmen often specialize in specific fields such as electrical drafting or mechanical drafting. Architects, on the other hand, create highly complex drawings that encompass every aspect of a building, from the initial concept through to the final construction stages.

Do architects need CAD? ›

Architectural drawing software is commonly referred to as CAD (computer-aided design) software. Architects use this software to produce the technical drawing of a building containing specifications that are used by a contractor to construct the final architectural building.

Who is an architectural draftsman? ›

Architectural draftsmen create technical drawings from the designs of architects and engineers. They incorporate measurements and building codes for construction, use CAD software to print schematics for use by architects, building contractors, and engineers, and enter CAD data to create 3-D design models.

How much does a draftsman charge vs. architect? ›

Drafting Costs Per Square Foot

Fees for drafting services range from $0.50 to $3 per square foot. The cost for an architect runs from $1.25 to as much as $10 per square foot.

Can a draftsman draw house plans? ›

A draftsman, like an architect, is someone who draws house plans which are used to build a home. While an architect typically has 5-7+ years of higher education, a draftsman may have a two- to four-year degree.

How much do architects make CAD? ›

The average architect salary in Canada is $121,860 per year or $62.49 per hour. Entry-level positions start at $94,278 per year, while most experienced workers make up to $156,494 per year.

What CAD software do most architects use? ›

AutoCAD: A powerful and widely used general-purpose CAD software used for creating 2D drawings and construction documents. Revit: A BIM software that offers more options for architects, including collaboration with mechanical, electrical and plumbing contractors, and construction staff.

Do architects use CAD or Revit? ›

AutoCAD and Revit are widely used by architecture and engineering firms when designing buildings.

Are architectural drafters in demand? ›

Vacancies for this career have slightly decreased by 1.87 percent nationwide in that time, with an average decline of 0.12 percent per year. Demand for Architectural Drafters is expected to go up, with an expected 1,130 new jobs filled by 2029. This represents an annual increase of 0.13 percent over the next few years.

Can a draftsman become an architect? ›

With experience, an architectural draftsperson can become a project manager, lead designer, or even an architect. Continued education and professional development over the course of a career is essential for any professional in the field of architecture, including architectural draftspersons.

How long does it take to become a draftsman? ›

The timeline to become a Drafter can vary, typically ranging from 1 to 2 years, which is the time needed to complete a diploma or associate degree in drafting or a related field.

Do I need an architect or draftsperson? ›

The tasks of a draftsman

Today's draftsmen also use computers and technology to communicate details about the project. If your project is complicated—an extension that must meet very specific requirements or a build that needs to factor in several elements—an architect may be a better bet.

Do architects draw or build? ›

Architects (and other designers) start investigating a new design with sketches and diagrams, to develop a rough design that provides an adequate response to the particular design problems.

What does a draftsman do? ›

A draftsman, or drafter, is a professional who is skilled in generating computer-aided design and drafting (CAD) drawings. A draftsman may specialize in various areas such as architecture, mechanical system, or civil engineering or in working with certain materials, like electrical circuits, concrete, or steel.

Top Articles
Latest Posts
Article information

Author: Sen. Emmett Berge

Last Updated:

Views: 5330

Rating: 5 / 5 (60 voted)

Reviews: 91% of readers found this page helpful

Author information

Name: Sen. Emmett Berge

Birthday: 1993-06-17

Address: 787 Elvis Divide, Port Brice, OH 24507-6802

Phone: +9779049645255

Job: Senior Healthcare Specialist

Hobby: Cycling, Model building, Kitesurfing, Origami, Lapidary, Dance, Basketball

Introduction: My name is Sen. Emmett Berge, I am a funny, vast, charming, courageous, enthusiastic, jolly, famous person who loves writing and wants to share my knowledge and understanding with you.