Getting Better Indoor TV Antenna Reception - Consumer Reports (2024)

Last year, cord-cutting boomed, when more than 5 million households cut ties with a traditional TV provider, and the trend is expected to accelerate in 2023, according to Wells Fargo analyst Steven Cahall.

Many cord cutters are switching to free over-the-air television by using an indoor TV antenna.

If you set up an antenna, you may find that the quality of the stations you receive is better than it was with old analog TV broadcasts—and perhaps even better than cable. If you live near a major TV market, there’s a good chance you can receive many local networks, such as ABC, CBS, Fox, NBC, PBS, and Telemundo. You can often get additional digital subchannels that offer everything from old shows and movies to local amateur sports.

The next couple of years will be a particularly good time to give an antenna a try, because a new over-the-air standard for broadcasts, called ATSC 3.0, is now rolling out. Among other enhancements, these new “Next-Gen TV” signals can carry internet content alongside traditional TV broadcasts. That means you may be able to stream some shows right over the air. The new broadcasts will also support 4K video and high dynamic range (HDR) content.

Of course, many antenna users supplement over-the-air programming with free streaming services. People willing to pay for subscriptions can put together an even more robust package of streaming content for as little as $25 a month

Compare Antennas

In our tests of top-selling indoor TV antennas, reception depended mainly on how far we were from broadcast towers, plus the terrain and details of our surroundings, such as buildings, trees, and hills. Some models worked better than others, but it was hard to predict which antenna would perform best in any particular location. We conducted the tests at 10 homes spread across the New York City metropolitan area.

Some indoor antennas are directional, so they need to be oriented toward broadcast towers. Multidirectional antennas, which receive signals from all directions, could be better for urban locations, but they might not pull in the more distant stations a properly positioned directional antenna could.

One surprise was that we found little correlation between price and performance. Cheaper antennas often did as well as—or better than—more expensive models.

So here’s our advice: Try a few antennas to see which one works best. To do that, you need to buy from a retailer that offers a no-hassle return policy and a reasonable warranty.

Raise Your Antenna

We’ve found that the height of your antenna is a critical factor in getting decent reception. That’s one reason roof-mounted antennas typically outperform indoor models. It’s also why you probably won’t get good reception using an antenna placed in your basem*nt.

If possible, place your indoor TV antenna in an attic or a second-story location, preferably by a window. Sometimes objects in the room or roofing materials will interfere with the signals, so it pays to try a few different attic locations. Of course, having the antenna in one room and the TV in another requires running a cable through your home because the antenna needs to be connected to the antenna (RF) input on your set.

In reality, most people will place the antenna in the same room as the TV. So try a few higher locations, such as along the wall near the ceiling. Some of flat antennas, such as the Mohu Leaf, can be painted (using a nonmetallic paint), allowing them to blend in with the décor. And some flat models, such as the Winegard FL5500A FlatWave Amplified, are reversible, typically black on one side and white on the other.

Point the Antenna in the Right Direction

Directional, aka “unidirectional,” antennas need to be oriented toward a broadcast tower.

To find out where the local broadcast towers are in your area, go to the Federal Communications Commission’s DTV Reception Maps page, then click on the station’s call letters to see where the signals are coming from. You’ll also be able to determine how many stations you should be able to pull in and their relative signal strength. You can also get useful advice and information, including tips on outdoor antennas, from AntennaWeb.

If you live in the suburbs of a big city, all the major broadcast towers may lie in the same direction, but you might need to reorient the antenna for different stations. As noted above, a multidirectional antenna doesn’t need to be aimed, but it might not be as effective at picking up signals from distant towers.

When you’re trying out different antennas, be sure to scan through the channels on your TV to see which antenna location pulls in the most stations.

Strike Up the Bands

Back in the analog TV signal days, most of your major broadcast channels, say, 2 through 13, were in the lower-frequency VHF band.

But since the transition to all-digital broadcasts and the subsequent spectrum auction that saw many stations shift locations, local channels are now on both VHF and UHF (channels 14 to 51) bands. So you want an antenna that does well with both bands to make sure that you’ll get all the stations you can.

Stop Interference

Anything that stands between an indoor TV antenna and the broadcast towers can degrade your reception. If possible, try placing the antenna in or near a window, provided you don’t live in an apartment building where your view consists of a neighboring building’s brick wall.

The second best choice is an external wall that faces the broadcast towers. If you live in a house, try to avoid a location that might be obscured by big trees, a shed or garage, or other large obstructions. Try a few different windows and walls to find the best spot.

When testing indoor TV antennas in my home, I found that it was handy to have an extra length of RG6 coaxial cable—and a female-to-female coax cable joiner—so that I could freely move the antenna to different locations. I also used some painter’s tape to temporarily attach the antennas to the various locations before determining the best spot.

Try an Amp

Many of the models we tested had an amplifier, which can boost signal strength to help pull in more distant stations. An amplifier can also be helpful if you intend to split the signal from one antenna to feed two TVs.

But our tests showed that amplified antennas weren’t always more effective than nonamplified models; they can also amplify noise and distortion, and overload reception from closer stations.

If you have an amplified antenna, try it with the amplifier turned off. If reception is good, leave it off. But if that doesn’t work well, turn the amp on and rescan the channels (see below) to test whether reception improves.

Rescan for Channels